Metrologic Instruments SP5600 User Manual download pdf (Page 13)

Installation

3. Follow steps a, b, or c

a. For the RS232 cable plug the 9 pin serial connector into a serial port on the host device.

Plug the opposite end into the communication port of the cradle.

b. For the USB cable plug the USB end of the cable into an appropriate communication port

on the host device and the opposite end of the cable into the communication port of the

cradle*.

c. For the WiFi connection to communicate with the host device the settings on OptimusR

and the host device must be configured correctly.

4. Power up the Optimus and select the Utilities option.

5. This will open additional menu options. Select the Transfer Files option.

6. Select Get Program on the next menu. The unit is now ready to download an application

program.

7. Place unit in cradle and download the appropriate application program.

8. Once the Optimus has received the application program the unit is ready for scanning and

collecting data.

Note: There are OptimusR models available that do not include the cradle. Models

that do not include a cradle as an accessory can have the power supply and the

communication cable connected directly to the unit.

*A software driver is required for proper installation. The driver is included with the installation CD provided with each

Optimus. In addition the driver can be downloaded from http://www.metrologic.com

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 24 25

No comments

Metrologic Instruments SP5600 User Manual Page 13